Buying Trailer Hub Cap

Buying trailer hub cap is one of the most important parts when it comes to maintaining your trailer. The dexter 2136 hub cap help to keep dirt, water and debris from entering the wheel bearings inside the hub. It also helps to protect the bearings and reduce the risk of overheating that can occur when a hub isn't adequately greased.

There are a few different types of hub caps, which vary in their function and style. They usually have a round shape and either cover the center fixture or the entire hub, which is the part that's visible from the outside of your vehicle.

Most of these hub caps are made from plastic, but some of the more expensive models are made from aluminum alloys that are resistant to corrosion and can withstand high temperatures for longer periods of time. If you're in the market for a new hub cap, you can stop by the local tire shop or a trucking supply store to find the best one for your application.

Dust Caps

Dust caps are a relatively inexpensive way to protect your trailer's hub bearings from dirt and debris that can build up on them. They are easy to remove and usually don't require jacking up the trailer to install or remove them.

Some experts recommend putting some grease on a dust cap before using it and then pounding it on with a hammer to evenly distribute the grease. It's also a good idea to check the bearings on the inside of the dust cap before removing it, as they can come off if they're not properly set.

Grease Plugs

Grease plugs are another option for keeping dust out of your hubs and bearings, as they are a more secure way to do it. They have a rubber plug that fits over the hole in the hub where you need to apply grease, and they are detachable so they can be replaced when needed.

The only downside to grease plugs is that they tend ; to be more bulky than dust caps. They also can be difficult to install, especially if you're a novice. Click at https://valcrum.com/product-category/hubodometers-for-trailers to discover more products provided by this firm.

You can buy these plugs individually or in a kit that includes several of them. This is a great choice if you're looking to save money and have more options when it comes to replacing your grease plugs.

Replacement Axle Hubs

Depending on the make and model of your trailer, you might be in the market for a new complete axle hub. A complete assembly consists of a hub, seals and bearings that are pressed in place. These are the most common type of hub assemblies and you can find them at just about any trailer parts store.

There are a few different ways to get a complete hub assembly, but the most common method is to replace your existing hub with a new one. If you're going to do this, you'll need a press and some basic hand tools, which should be enough to get the job done. For more information about this, visit: https://en.wikipedia.org/wiki/Center_cap.